Mattress On Demand Katy
23233 Kingsland Blvd STE A, Katy, TX 77494

ONLY AT MATTRESS ON DEMAND
KOVA Mattresses in Katy, Richmond & Rosenberg, TX
KOVA is our own mattress line, made in Texas and sold through nobody but us. Core covers the essentials, Lux is where the materials step up, and the Apex sits at the top. Every model is on the floor, so you compare them side by side instead of guessing from a screen.
KOVA is not sold through other retailers, so there is no version of it sitting on a competitor's floor and no review site that has slept on one. Fifteen minutes across two or three of them in our showroom settles it faster than any spec sheet can.
0% APR FOR UP TO 60 MONTHS
Synchrony · Snap Finance · Affirm Book a Showroom VisitTHREE FORT BEND SHOWROOMS
Richmond, Katy and Rosenberg. All three are staffed by Certified Sleep Science Coaches, all three are open seven days a week, and all three carry the KOVA line.
23233 Kingsland Blvd STE A, Katy, TX 77494
1531 FM359 RD STE 500, Richmond, TX
3520 FM 723 Rd STE M, Rosenberg, TX 77471
WHY BUY IT FROM US
The mattress is the easy part. This is the rest of it.
Every promise here applies to mattresses bought from Mattress On Demand, in store or online. Our team will walk you through the full terms before you buy.
HOW A KOVA IS BUILT
Because we build the line ourselves we can show you exactly what is inside it. These are KOVA's own layer diagrams, with the coil counts, foam densities and cover fabrics labelled.
The Core 11-inch firm hybrid, labelled: a heavyweight circular-knit quilt panel, a chemical-free fire barrier, 1.5 inches of high-density quilt foam, an inch of extra-firm support foam, an 8-inch 840-coil encased unit with a steel edge, and a 0.75-inch shock-absorbing base.
The Atlas Firm 14-inch puts a 5-zone ergonomic foam layer over a foam-encased 900-coil pocketed system. Each coil moves on its own, so one person turning over does not travel across the bed.
Identical 900-coil foundation to the Atlas with a plush Euro-top built over it. Lying on the two back to back is the cleanest way to feel what a comfort layer actually does when the support underneath is held constant.
Graphite memory foam conducts heat away faster than gel or copper, over a high-density foam base and under a smooth-top performance fabric. Thirteen inches, offered in four feels from plush to firm.
Eight layers, including 1.5 inches of natural medium-firm Talalay latex and an inch of cooling graphite titanium memory foam above the 840-coil steel-edge unit, under a Deep Freeze stretch fabric.
The Chill 14-inch medium leads with the Deep Freeze stretch fabric, then an inch of cooling graphite titanium memory foam and 1.5 inches of medium-soft comfort foam over the same 840-coil unit.
THE KOVA LINEUP
Core is the everyday tier and spans foam, innerspring and hybrid. Lux is where the materials change - copper and graphite foams, cooling covers and zoned support. Apex is the flagship. Elite is next.
7 to 15 inches. Foam, innerspring and hybrid. From $199.
The everyday tier. The Basic 7-inch foam and Milan 11-inch firm innerspring for guest rooms and first apartments, then the Ridge, Cove, Atlas, Solis, Ice-Tex and Aurora ET hybrids in firm, medium and plush.
Copper, graphite and cool-to-the-touch covers. From $999.
Where the materials change. The Copper Lux hybrid in medium and firm, the Arc Chill and Arie Chill cooling hybrids, and the Graph graphite memory foam bed offered in four feels so an all-foam sleeper can pick as precisely as a hybrid shopper.
14 inches. Cooling Euro-top hybrid. From $1,199.
The top of the line. A gel-infused memory foam comfort layer over a zoned pocket-coil base, finished with a cooling stretch-knit, and the only KOVA sold in soft, medium, firm and luxury firm so the same build can be fitted to either side of a couple.
From $1,199
Shop the Apex
Latex, micro-coils and a PCM cooling cover.
The next tier up, not on the floor yet. Ask a coach on your visit and we will tell you where it is.
Pricing announced at launch
Ask about KOVA EliteWHY BUY IT LOCALLY
It comes down to how much you want on top of the coils, and a product page cannot answer that. Side sleepers usually land on the Solis plush, the Cove medium or the Graph in plush. Back and stomach sleepers go to the Ridge, Atlas, Arc Chill or the Graph in firm. Hot sleepers start with the Arc Chill, Arie Chill, Ice-Tex or Copper Lux.
Visit a ShowroomEvery KOVA model is set up on the floor in Richmond, Katy and Rosenberg, so you can lie on Core and Lux back to back rather than a week apart.
A Certified Sleep Science Coach can run a ScanFit 3D body scan and match you by where your weight actually falls, instead of asking how firm you think you like it.
Local delivery is free within 30 miles of any of our stores, and it is our own crew who brings it in, sets it up in the room and leaves with the packaging.
0% APR for up to 60 months through Synchrony, subject to credit approval, with Snap Finance and Affirm as alternatives.
WHAT BACKS IT
KOVA is our own brand, so there is no manufacturer to point at when something needs standing behind. These are the parts you can check.
KOVA is built in Texas to our own specification, down to the Texas-built pocket-coil units inside the Ridge, Cove and Ice-Tex.
Every foam layer in every KOVA is CertiPUR-US certified: made without formaldehyde, ozone depleters, mercury, lead or the phthalates the CPSC regulates.
The same cover the national brands on our floor carry. It is our own warranty on our own brand, so the claim is handled here rather than passed to a manufacturer.
No other retailer sells KOVA. There is no national brand name in the price, so the money goes into the materials instead.
0% APR financing is available for up to 60 months through Synchrony, subject to credit approval, with Snap Finance and Affirm as alternatives. Ask in store which plan fits the model you are looking at.
KOVA FAQ
The tiers, what is inside one, who makes it, firmness by sleeping position, sizes, pricing, warranty, care and delivery.
At all three Mattress On Demand showrooms: Richmond at 1531 FM359 RD STE 500, Katy at 23233 Kingsland Blvd STE A, and Rosenberg at 3520 FM 723 Rd STE M, all open seven days a week. Every model in the line is set up on the floor, so you can compare Core against Lux in the same visit rather than one at a time.
Core is the everyday tier: the Basic 7-inch foam and Milan 11-inch firm innerspring, then the Ridge, Cove, Atlas, Solis, Ice-Tex and Aurora ET hybrids. Lux is where the materials step up, with copper and graphite foams, cool-to-the-touch covers and 7-zone ergonomic foam. The Apex is the flagship, and the only KOVA offered in four firmnesses.
We do. KOVA is Mattress On Demand's own brand, built to our specification and made in Texas. Because there is no national brand name to pay for, the money goes into the materials instead - that is the whole point of the line.
No. KOVA is sold only through Mattress On Demand, so there is no version of it on a competitor's floor and no review site that has slept on one. The showroom is the only place to lie on one before you buy.
Yes - KOVA is made in Texas, including the Texas-built pocket-coil units inside the Ridge, the Cove and the Ice-Tex.
Both, depending on the model. Most of the line is hybrid, with pocketed coils under the comfort layers. The Graph and the Contour are all-foam, and the Milan is a traditional innerspring. If you share the bed or sleep warm, start with a hybrid.
Named layers rather than marketing words. The Core 11-inch firm hybrid, for example, is a heavyweight circular-knit quilt panel, a chemical-free fire barrier, 1.5 inches of high-density quilt foam, an inch of extra-firm support foam, an 8-inch 840-coil encased unit with a steel edge, and a 0.75-inch shock-absorbing base. The layer diagrams are on this page.
Each coil is wrapped and moves on its own, so one person turning over does not travel across the bed, and air moves through the support layer in a way it cannot move through a solid foam core. The Atlas and the Solis use a foam-encased 900-coil unit; most of the range uses an 840-coil unit with a steel edge.
The comfort layer in the KOVA Graph. Graphite conducts heat away faster than gel or copper, so you get the close contouring of memory foam with less of the heat it is known for. It sits over a high-density foam base under a smooth-top performance fabric.
The cooling models are the Arc Chill, the Arie Chill, the Ice-Tex and the Copper Lux, built around cool-to-the-touch knits and copper or charcoal-infused foams, plus the Graph with its graphite layer. A cooling build reduces how much heat is trapped around you; it is not refrigeration, and your sheets and protector matter too.
Yes. Every foam layer in every KOVA is CertiPUR-US certified: made without formaldehyde, ozone depleters, mercury, lead or the phthalates the CPSC regulates, and tested for low emissions.
The line runs from an entry-level foam mattress up to the Apex flagship, and the current price for every size sits on each model's own page. Core and Lux both show their starting price on this page.
That is the comparison worth making in person, and it is the reason we put KOVA on the same floor as Helix, Brooklyn Bedding, Tempur-Pedic and Stearns & Foster rather than in a separate room. Lie on a KOVA and a national model at a similar price and judge the build, not the badge.
Most side sleepers land on the Solis plush Euro-top, the Cove medium or the Graph in plush or medium-plush, where the comfort layer gives at the shoulder and hip. Too firm and you get shoulder pressure; too soft and the spine bows.
The Ridge, the Atlas, the Arc Chill or the Graph in firm. Back and stomach sleeping needs the hips held level with the ribs, which means support closer to the surface and less sink.
Usually a medium-firm build with zoned foam - the Ridge, the Atlas or the Arc Chill. The goal is a neutral spine rather than maximum firmness, and a too-firm mattress can leave a gap under the lower back. A ScanFit 3D body scan in the showroom shows where your weight actually concentrates. Pain that wakes you at night is worth raising with a doctor.
Yes. The pocketed-coil hybrids isolate movement well, the Copper Lux comes in medium and firm so you can lie on both side by side, and the Apex is offered in four firmnesses. If you cannot agree, a Split King gives each of you your own feel.
The Atlas Firm 14-inch is the one we point to most: a foam-encased 900-coil pocketed system over a firm base support foam, built to resist impressions. The Ice-Tex uses a heavy-duty coil unit for the same reason.
The flagship: a 14-inch cooling Euro-top hybrid with a gel-infused memory foam comfort layer over a zoned pocket-coil base, finished with a cooling stretch-knit. It is the only KOVA sold in soft, medium, firm and luxury firm.
The next tier above Lux, built around natural latex, a micro-coil comfort layer and a PCM cooling cover. It is not on the floor yet - ask a coach on your visit and we will tell you where it has got to.
Most models come in Twin, Twin XL, Full, Queen, King and California King. The exact size run varies by model and is listed on each model's own page.
Yes, on the Milan, the Ridge, the Cove, the Ice-Tex and the Aurora ET. A Split King is two Twin XL mattresses side by side, so each person picks their own feel and, on an adjustable base, their own head and foot position.
No. Any solid foundation, platform or adjustable base works, as long as a queen or larger has proper centre support. A sagging or unsupported base shortens the life of any mattress at any price, so it is worth checking what you already have before delivery.
KOVA is only sold here, so no competitor can advertise one cheaper - but our 1-Year Price Guarantee still applies to our own later advertised price. If we advertise the same model and size for less within 365 days of your purchase, we refund the difference once our team verifies it.
Current offers are listed on our promotions page and change through the year. Because KOVA is our own line, a coach can tell you exactly what applies to the model you are looking at on the day you visit.
A Limited Lifetime Warranty against manufacturing defects - the same cover as the national brands on our floor. Because KOVA is our own brand the warranty is ours, so the claim is handled by the people who sold you the mattress rather than passed to a manufacturer.
Every mattress comes with our 365-Night Comfort Guarantee. After a 30-night adjustment period, if it is still not right within 365 nights of delivery we exchange it for one of equal or greater value. It is an exchange rather than a return; the full terms are on our refund policy page.
Yes. Local delivery is free within 30 miles of any of our stores and our own team handles it, so the bed is set up in the room and the packaging leaves with us. We confirm the delivery window when the order is placed.
Use a breathable protector from the first night - most warranty claims are refused on a stained mattress - rotate it head to foot every few months so it wears evenly, and keep it on a base with proper centre support.
No, you can walk in. Booking a slot just means we will have the models you are weighing up ready to compare and a coach free to run a ScanFit scan when you arrive.
FEEL IT FOR YOURSELF
Richmond, Katy and Rosenberg, seven days a week. Book a slot and we will have the models you are weighing up ready to compare, or walk in and we will work it out from there.